For those who have received our limited edition patches, here are some instruction to apply and care for it for longevity:

Do NOT use on un-ironable fabrics (low melting point) such as nylons, vinyl's, or leathers. Iron may scorch leathers and suede's material.

1. Pre-wash all materials without fabric softeners.

2. Preheat iron to medium heat. Make sure the "steam" option is turned off. On heat-seal machine 175 C /cotton/ maximum pressure.

3. Place the patch on garment glue side down (peal the protective paper first).4. Cover with thin white cloth or towel, we recommend silicon paper (backing paper).5. With home iron, keep the pressure on for 45-50 seconds; 25 seconds for the heat-sealing machine on a hard surface, Do NOT run iron, Hold in one spot for some time! Big patches please start pressing form the center to the edges of a patch. After this please press once again edges of a patch -about 5 sec.

6. Let cool, then turn garment inside-out and iron on reverse side for 10 seconds.7. Laundry Instructions-Turn shirt inside-out. Cold wash, Gentle cycle, Drip dry. Do NOT put the garment in the dryer! Do NOT bleach. First washing of the pressed patch can take place after 48 hrs. Give few stitches on the patch edge to keep it for a long time.

Please pay attention to all plastic elements in a nearby of a patch-hot iron may damage them!!!

Patches can be sewn onto fabric or garments with a single or double stitch.